Why Won't My Sandisk Flash Read on My Mac

Fix USB Flash Drive not Showing up or not Recognized on Mac (Updated for macOS 12)

Summary: This article will help you set up the USB flash drive non showing up or non recognized on Mac. Also, y'all can learn how to detect the USB wink drive on Mac with iBoysoft Mac Information Recovery and get your data dorsum.

Normally when you plug a USB flash drive into your Mac, you tin observe the connected USB device on Mac desktop or in Finder and then access files on it.

However, when you lot found your USB drive not showing up on Mac, information technology tin can exist a headache. Some Mac models later upgrading to macOS 12 accept as well encountered this thorny problem. How to make Mac detect the USB bulldoze and you can easily find it in Finder or desktop?

We offer this detailed guide to enable the USB drive to work normally on Mac again. You volition observe information technology also helpful for fixing the USB drive not working upshot on Macs running macOS Monterey.

Now, let's dive into 6 detailed solutions.

• 1. Check USB cable, USB connection, and USB ports
• 2. Update the USB driver
• three. Change Finder preferences to show up USB flash drive on Mac desktop
• 4. Alter Finder preferences to bear witness upwardly USB flash bulldoze in Finder
• 5. Repair USB flash drive with Outset Aid
• 6. Recover data and reformat USB flash drive

How to fix Mac not recognizing the USB flash drive?

Prepare ane: Cheque connections

A good connexion is a mandatory condition for USB wink drives working on Mac. Firstly, let'due south check the connections between USB drives and your Mac to see if a poor or loose connection causes Mac not recognizing the USB flash drive.

1. Attempt to re-plug the USB flash drive into your Mac and see if information technology shows up.
2. Endeavor another USB port to connect this USB flash drive.
3. Try another USB cable to connect the USB flash drive.
4. Try to connect the USB drive directly to your computer, not via a USB-C adapter or USB hub.
5. Restart Mac to reset USB ports on Mac to detect the USB bulldoze.

Fix two: Reinstall or update USB driver

When your USB device is not detected by Mac, you should bank check if any USB driver updates are available, please practise the following steps:

• one. Click on the Apple in the upper left corner of the screen.
• 2. Select "Software Update..."
• iii. Any updates available will exist listed and able to be downloaded or you lot will be told your software is upwardly to engagement.

If you have updated your Mac to the latest macOS Monterey, nevertheless, y'all even so can't find the USB wink drive on Mac. Information technology is probably considering the macOS 12 bugs crusade the Mac USB port non to piece of work, and so your Mac failed to recognize your USB flash bulldoze.

To set it, it's recommended to ask the developer on Apple tree'south support page for aid. Or y'all can downgrade your macOS or reinstall macOS to avoid the macOS 12 bug.

macOS Monterey Update Problems, Problems, How to Fix Them? (November 2021)

Are y'all facing more problems due to the macOS 12 bugs? This post is a roundup listing of all reported and possible macOS 12 Monterey updating issues and their fixes. Read more than >>

Subsequently trying the in a higher place-mentioned solutions to fix Mac not recognizing the USB drive result, how to cheque if it is detected on Mac now? Download, install and launch iBoysoft Mac Information Recovery on your Mac and run across if it is detected past iBoysoft Data Recovery.

If your USB drive is now recognized by iBoysoft Information Recovery, follow the sorcerer to recover data from your USB wink drive and so reformat information technology.

If your USB bulldoze is not detected by iBoysoft Data Recovery either, ship information technology to a local skillful for repair.

How to fix the USB flash drive not showing upwards on Mac?

At present that the Mac has detected your USB flash drive, if you however can't find the USB drive on Mac, you need to try the following solutions to set up the USB flash drive not showing upwards on Mac:

Fix 1: Change Finder preferences to show upward USB flash bulldoze on Mac desktop

If you can't detect the connected USB device on the Mac desktop. Thus, you should go to Finder > Preferences > General and make certain the "External disks" selection is checked. Then yous'll see the connected USB flash drive showing up on the Mac desktop.

Ready 2: Modify Finder preferences to evidence up USB wink drive in Finder

Can't find the USB flash drive in Finder? Go to Finder > Preferences, this time switch to the Sidebar tab, and check the "External disks" option under Locations.

Y'all will come across the connected USB wink drive in Finder'south sidebar.

Fix 3: Repair USB flash drive with Starting time Aid

If y'all tin can see a USB flash drive but it is non mounting in Mac Deejay Utility, in this case, y'all can attempt macOS built-in First Help to repair the errors on the USB wink bulldoze.

• 1. Launch Disk Utility from Utilities in the Applications folder.
• 2. Select the corrupted USB drive from the sidebar.
• 3. Click Commencement Aid at the top of the window, and then click Run, wait until the reparation procedure finishes.
• 

Fix 4: Reformat USB flash drive

If Offset Aid was unable to repair the errors in the USB drive, it means that the file system or division table of the flash bulldoze has been damaged seriously. Ordinarily, to fix the USB wink bulldoze non showing upwardly on Mac, y'all have to reformat it.

The question is, reformatting will wipe all data off this flash drive. Hence, firstly, recover data from the USB drive with iBoysoft Mac Data Recovery - A professional USB drive data recovery software.

3 simple steps to recover data from the USB flash bulldoze that's not showing up:

Step 1: Download, install and launch iBoysoft Data Recovery for Mac.

Step 2: Select your USB drive and click the Scan button to scan all data on this wink drive.

Step iii: Preview the searching results, cull files you lot demand and click Recover to get them back.

After you successfully remember data from the USB wink drive that's not showing upwards, it is fourth dimension to format the USB bulldoze on Mac. After the reformatting process is finished, the USB flash drive will show up on Mac correctly.

Finally, if the USB flash bulldoze is not showing up in Mac Deejay Utility, System Information, or in the iBoysoft data recovery app, information technology might exist physically failed. If you don' have any important data, you can simply replace the damaged USB drive with a new ane. But if you take annihilation important, you'd meliorate send it to a local specialist for information recovery help.

Bonus tips for using the USB flash bulldoze

The USB wink drive, pen bulldoze, jump bulldoze, is user-friendly but also frail to shop information based on their special retention units and shape. Then, how can we protect it from abuse and non showing upwardly on Mac?

You may need these tips:

1. Don't put USB flash drives in the pockets of your pants or T-shirt, especially, when information technology's naked. This could keep your drive away from moisture from your trunk and dust on your clothes. More importantly, it can avoid accident breaks off when you sit or crash-land into something.
2. Don't unsafely eject the USB flash drive. Fifty-fifty though it's inevitable for portable drives to be plugged and unplugged ofttimes, yous can make sure you squirt it safely and properly every single fourth dimension.
3. Create a backup of your information. Although y'all accept been taking good care of your USB wink drive, you should know that it has a limited life bridge. Therefore, to avoid unexpected information loss, you'd better practise a regular backup of your files.

Well-nigh author

Amanda Wong

Amanda is one of the primary columnists at iBoysoft, she loves exploring new technologies and writing technical articles focusing on computers, OS, etc., to aid people out of problems.

chapmanoffeir.blogspot.com

Source: https://iboysoft.com/mac-data-recovery/usb-flash-drive-not-showing-up-on-mac.html

Share this post